• This forum is strictly intended to be used by members of the VS Battles wiki. Please only register if you have an autoconfirmed account there, as otherwise your registration will be rejected. If you have already registered once, do not do so again, and contact Antvasima if you encounter any problems.

    For instructions regarding the exact procedure to sign up to this forum, please click here.
  • We need Patreon donations for this forum to have all of its running costs financially secured.

    Community members who help us out will receive badges that give them several different benefits, including the removal of all advertisements in this forum, but donations from non-members are also extremely appreciated.

    Please click here for further information, or here to directly visit our Patreon donations page.
  • Please click here for information about a large petition to help children in need.
Status
Not open for further replies.
Yes, because you've said exactly that:
Not really what I've said, no. There is a difference between "Take an infinite-dimensional space and then try to add a single new axis to it" and "Take an infinite-dimensional space and then have a space of an even higher order encompassing it." That's why I've been speaking not in terms of dimensions per se but in terms of nested higher-dimensional realms.
 
Not really what I've said, no. There is a difference between "Take an infinite-dimensional space and then try to add a single new dimension to it" and "Take an infinite-dimensional space and then have a space of an even higher order encompassing it." That's why I've been speaking not in terms of dimensions per se but in terms of nested higher-dimensional realms.
Why would we treat realms and dimensions differently, when they're equalized to be the same at all other scales?

Why does it only jump beyond R^1 points once there's R^0 layers? 11-B through 1-B also involves R^1 points.
 
Why would we treat realms and dimensions differently, when they're equalized to be the same at all other scales?
Shit gets weird in infinite dimensions. That's really all there is to it. I mean, you'd certainly think R^N (The space of all sequences) would have only countably-many dimensions, but that is just not the case.

In more practical wiki terms, this should be intuitively obvious, too. A space that's completely above an infinite-dimensional realm has to make that jump precisely because adding +1 dimension to a set of infinite dimensions does nothing. Similar to how adding +1 universe to a set of countably infinite universes does nothing, and the next biggest thing is uncountably infinite universes, instead. Hierarchical jumps get larger so as to maintain the pattern.
 
In more practical wiki terms, this should be intuitively obvious, too. A space that's completely above an infinite-dimensional realm has to make that jump precisely because adding +1 dimension to a set of infinite dimensions does nothing. Similar to how adding +1 universe to a set of countably infinite universes does nothing, and the next biggest thing is uncountably infinite universes, instead. Hierarchical jumps get larger so as to maintain the pattern.
That issue exists long beforehand; that's the point I was trying to make with the rest of my post.

And still, this does not justify treating dimensions and hierarchies of realms differently in this regard. You haven't given a reason which applies to one of those but not the other.

And I do have to wonder, would you use the same argument in the other direction? If a series had an infinite hierarchy of realms, with both the realm at the top of that hierarchy and the realm directly below that being relevant, would you rate the second-highest realm at 1-B since that's the only meaningful way to be inferior?
Shit gets weird in infinite dimensions. That's really all there is to it. I mean, you'd certainly think R^N (The space of all sequences) would have only countably-many dimensions, but that is just not the case.
I wouldn't think that; holding all possible sequences sounds like the power set. I'd expect the space of a single infinitely-long sequence to be the appropriate equivalent.
 
That issue exists long beforehand; that's the point I was trying to make with the rest of my post.

And still, this does not justify treating dimensions and hierarchies of realms differently in this regard. You haven't given a reason which applies to one of those but not the other.
The example given is already justification enough, and it's been sufficiently expounded on, already. More on that down below.

I don't know what you mean with that first paragraph at all.

And I do have to wonder, would you use the same argument in the other direction? If a series had an infinite hierarchy of realms, with both the realm at the top of that hierarchy and the realm directly below that being relevant, would you rate the second-highest realm at 1-B since that's the only meaningful way to be inferior?
This hypothetical sounds like it goes:

Infinite Layers < Layer ω < Layer ω+1.

In which case, I'd rate the latter two as different levels of High 1-B+. Those layers aren't dimensions, but spaces made up of dimensions, so "Layer ω" is not the same as ω dimensions, and neither is "Layer ω+1" the same as ω+1 dimensions.

I wouldn't think that; holding all possible sequences sounds like the power set. I'd expect the space of a single infinitely-long sequence to be the appropriate equivalent.
What exactly do you mean by "a single infinitely long sequence"? A sequence of coordinates filled with 1s that goes on forever is, indeed, part of the space with uncountably infinite dimensions, and not the space with countably infinite ones, so this wording confuses me.
 
I don't know what you mean with that first paragraph at all.
You can't get meaningfully larger than aleph-one points without going to aleph-two points, yet 11-B already has aleph-one points, and aleph-two points is not reached until High 1-B+.

So why use the argument of "it has to be meaningfully larger, so it's High 1-B+" when the starting point is High 1-B, and not from any earlier structure?
This hypothetical sounds like it goes:

Infinite Layers < Layer ω < Layer ω+1.

In which case, I'd rate the latter two as different levels of High 1-B+. Those layers aren't dimensions, but spaces made up of dimensions, so "Layer ω" is not the same as ω dimensions, and neither is "Layer ω+1" the same as ω+1 dimensions.
I can see why you'd read it like that, but I was imagining the series establishing it as Layer ω and Layer ω-1.
What exactly do you mean by "a single infinitely long sequence"? A sequence of coordinates filled with 1s that goes on forever is, indeed, part of the space with uncountably infinite dimensions, and not the space with countably infinite ones, so this wording confuses me.
Oh, you're talking about "sequences" as individual co-ordinates within the space, not as in the "sequences of dimensions" that can each hold vast swaths of co-ordinates.

I find it strange that you'd get a result like this, then. When operating in the real number line, there's be aleph-one many sequences of length 1, and I don't think you'd reach a higher cardinality until you get to the power set, which would require sequences of size aleph-one. Yet you're saying that you can get something substantively larger through sequences of length aleph-zero.

What's screwing up there?
 
You can't get meaningfully larger than aleph-one points without going to aleph-two points, yet 11-B already has aleph-one points, and aleph-two points is not reached until High 1-B+.

So why use the argument of "it has to be meaningfully larger, so it's High 1-B+" when the starting point is High 1-B, and not from any earlier structure?
That depends wholly on what "meaningfully larger" is said with respect to. You can't be meaningfully larger than a line by being a square in terms of cardinality, but you can be meaningfully larger than it in terms of measure.

Now, with regards to this specific case, we would expect each layer in a hypothetical hierarchy of dimensional spaces to stand in similar proportion to each other, and as such, the ω-th member of the hierarchy would have to dimensionally surpass the set of all dimensions below it, which is countably infinite (Just as any given n-dimensional space surpasses the set of all dimensions below it, which is of n-1 dimensions). Ergo, the ω-th member of the hierarchy must be uncountably infinite-dimensional.

I can see why you'd read it like that, but I was imagining the series establishing it as Layer ω and Layer ω-1.
That doesn't really make sense, since ω-1 isn't really a thing. What immediately precedes ω is the natural numbers, so there's no "highest number that comes before ω." If you have the topmost part of an infinite hierarchy, and then a layer standing immediately below it, those two layers stand as ω+1 to ω necessarily.

Oh, you're talking about "sequences" as individual co-ordinates within the space, not as in the "sequences of dimensions" that can each hold vast swaths of co-ordinates.

I find it strange that you'd get a result like this, then. When operating in the real number line, there's be aleph-one many sequences of length 1, and I don't think you'd reach a higher cardinality until you get to the power set, which would require sequences of size aleph-one. Yet you're saying that you can get something substantively larger through sequences of length aleph-zero.

What's screwing up there?
Well, not quite. The real line is composed of only a countable number of objects of length 1 (Intervals). If you stuck together uncountably infinite of those, you'd have the long line, which is a quite different beast.

For this case, what ***** it up is largely the definition of a basis; a space of a countable basis needs to have each point in it be specified by some combination of a finite number of vectors in the basis. This can happen wtih the space of all finite sequences, for obvious reasons, but not with the space of all sequences, since it has infinitely long sequences and thus subsets that can't be obtained by finite sums of vectors. Translated to practical terms: The former space can be reached by unifying all finite-dimensional spaces, whereas the latter can't.
 
That depends wholly on what "meaningfully larger" is said with respect to. You can't be meaningfully larger than a line by being a square in terms of cardinality, but you can be meaningfully larger than it in terms of measure.

Now, with regards to this specific case, we would expect each layer in a hypothetical hierarchy of dimensional spaces to stand in similar proportion to each other, and as such, the ω-th member of the hierarchy would have to dimensionally surpass the set of all dimensions below it, which is countably infinite (Just as any given n-dimensional space surpasses the set of all dimensions below it, which is of n-1 dimensions). Ergo, the ω-th member of the hierarchy must be uncountably infinite-dimensional.
Then ig my approach would go to, is it really meaningfully larger if it's another indistinct member of that infinite hierarchy? If the gap between that item, and the ones before it, isn't any different than the gap between the 981st layer and the 982nd?
That doesn't really make sense, since ω-1 isn't really a thing. What immediately precedes ω is the natural numbers, so there's no "highest number that comes before ω." If you have the topmost part of an infinite hierarchy, and then a layer standing immediately below it, those two layers stand as ω+1 to ω necessarily.
I thought that object just didn't have a proper term, rather than there being a legitimate void/discontinuity.
Well, not quite. The real line is composed of only a countable number of objects of length 1 (Intervals). If you stuck together uncountably infinite of those, you'd have the long line, which is a quite different beast.
Sorry, bad confusion of terminology. I meant "of length 1" in the sense that (1,1,1,0,0,0...) is a sequence of length 3, (1234,5678,0,0,0...) is a sequence of length 2, and (G(64),0,0,0,0...) is a sequence of length 1.

The actual size of those co-ordinates would be 0, and their distance from the origin would vary but typically just be a finite number.
For this case, what ***** it up is largely the definition of a basis; a space of a countable basis needs to have each point in it be specified by some combination of a finite number of vectors in the basis.
That's weird.
 
Last edited:
Then ig my approach would go to, is it really meaningfully larger if it's another indistinct member of that infinite hierarchy? If the gap between that item, and the ones before it, isn't any different than the gap between the 981st layer and the 982nd?
I'd deny the premise of that argument. For there to be a similar proportion between each layer (That is, X > Y if X dimensionally transcends Y), it would have to be meaningfully larger, and so the equality of gaps that you describe can't exist to begin with. Otherwise it wouldn't be a legitimate higher layer of the hierarchy at all.

I thought that object just didn't have a proper term, rather than there being a legitimate void/discontinuity.
Yeah, nah.

That's weird.
It be like that.
 
Well, that still leaves the other stuff to be responded to.
 
Sorry, bad confusion of terminology. I meant "of length 1" in the sense that (1,1,1,0,0,0...) is a sequence of length 3, (1234,5678,0,0,0...) is a sequence of length 2, and (G(64),0,0,0,0...) is a sequence of length 1.

The actual size of those co-ordinates would be 0, and their distance from the origin would vary but typically just be a finite number.
Practically this makes things very difficult, since literally everything that occupies or effects the entirety of that aleph-null-dimensional space would automatically convert it to an aleph-one-dimensional space. Which would upgrade every High 1-B who doesn't simply have that rating due to Composite Hierarchies (and has never effected the entirety of the stack at once).
You've clarified on the "automatically convert" part, but otherwise the point still stands; if having the co-ordinary (1,1,1,1...) be filled in a countably-infinite-dimensional space requires that space to actually be uncountably-infinite-dimensional, then most High 1-Bs would be upgraded.
 
You've clarified on the "automatically convert" part, but otherwise the point still stands; if having the co-ordinary (1,1,1,1...) be filled in a countably-infinite-dimensional space requires that space to actually be uncountably-infinite-dimensional, then most High 1-Bs would be upgraded.
If that part is taken out of the way, then the rest of the point collapses as well, since the crux of the matter is precisely that (1,1,1,1...) is simply not contained in countably infinite-dimensional space to begin with. Encompassing the axes (1,0,0,0,...), (1,1,0,0,...), (1,1,1,0,...), and and so on and so forth, isn't the same as encompassing all those axes and also (1,1,1,1,1...). So most High 1-Bs won't really be upgraded, no, since you can be truly infinite-dimensional even without that, and neither would "There is an infinite-dimensional space and I destroyed it" inherently make you High 1-B+ for the same reason.
 
If that part is taken out of the way, then the rest of the point collapses as well, since the crux of the matter is precisely that (1,1,1,1...) is simply not contained in countably infinite-dimensional space to begin with. Encompassing the axes (1,0,0,0,...), (1,1,0,0,...), (1,1,1,0,...), and and so on and so forth, isn't the same as encompassing all those axes and also (1,1,1,1,1...). So most High 1-Bs won't really be upgraded, no, since you can be truly infinite-dimensional even without that, and neither would "There is an infinite-dimensional space and I destroyed it" inherently make you High 1-B+ for the same reason.
You can be truly infinite-dimensional without there being infinitely many dimensions which each contain objects?
 
You can be truly infinite-dimensional without there being infinitely many dimensions which each contain objects?
You can be truly infinite-dimensional without there being an endpoint to the series of embedded higher-dimensional spaces, which is what High 1-B+ would entail there.

Also I did this:


 
Last edited:
That whole High 1-B+ debate sounds like my cup of tea, but I can't really follow which distinction is debated in detail :unsure:
Anyway, on suspicion I will point out that you can, of course, add a dimension to a countably infinite space without it becoming uncountable dimensional.

The th level of a hierarchy of finite dimensional spaces, each larger than the last, I would identify with the space of finite sequences. For the +1th level it would depend on what the "+1" means in detail. Just another dimension (or something equivalent)? Then it's still countable. Other differences? More debatable.
 
Anyway, on suspicion I will point out that you can, of course, add a dimension to a countably infinite space without it becoming uncountable dimensional.
Never denied that, obviously. The relevant test-case for the matter is moreso "An infinite-dimensional space and then an even higher-order realm that's above and beyond it, but not above physicality/dimensionality/composition," or equivalently, "The layer of a hierarchy of dimensional spaces that comes after all the finite-dimensional ones are exhausted."
 
I mean, an ∞+1th dimensional space would also be "above and beyond" an ∞-dimensional space, as it is even larger (as far as one can talk about size at this level). That's why we currently require that the realm would be above in a fashion that it's a different hierarchy as a whole, not just a yet larger dimensional space. (Aside, of course, if confirmed to be uncountable dimensional in some way)
Basically, it sounds to me like the description you propose doesn't distinguish clearly enough between countable extensions of the basis and jumps to an uncountable basis.
 
I mean, an ∞+1th dimensional space would also be "above and beyond" an ∞-dimensional space, as it is even larger (as far as one can talk about size at this level). That's why we currently require that the realm would be above in a fashion that it's a different hierarchy as a whole, not just a yet larger dimensional space. (Aside, of course, if confirmed to be uncountable dimensional in some way)
I don't think the "different hierarchy" business goes that hard in the new Tiering System anymore, since a "hierarchy" is really just "A set of inferior and superior levels all defined by the same basic attribute." In that sense you really only get a different hierarchy in any meaningful sense at the 1-A range now.

I'd also question whether "∞+1 dimensions" is even coherent for this case, since by doing this you haven't really added a more dimensions to the space, so there isn't many respects in which you can say it's larger. At best it's "larger" in the same way an uncountable number of infinite-D universes is larger than a single one, but this isn't exactly the difference we'd expect from one layer in a hierarchy to another, like I said here.
 
Last edited:
Yeah, and I agree, hence my point was never about a single extra dimension. The crux of the matter is whether what I described above is actually properly described as "A single extra dimension."
 
We don't consider adding an extra timeline to an infinite multiverse to make it Low 1-C.

We should not consider adding an extra dimension to an infinite stack to make it High 1-B+.
Side-note: Like I told you in private, I already added everything we agreed on to the sandbox pages (And also a couple other things that ended up being removed by carelessness on my part, like the "Predating spacetime isn't 1-A" section in the FAQ and etc). When can I expect you to write that list you mentioned before?
 
Yeah, and I agree, hence my point was never about a single extra dimension. The crux of the matter is whether what I described above is actually properly described as "A single extra dimension."
I see no reason why it wouldn't be, when adding a timeline would be.
Side-note: Like I told you in private, I already added everything we agreed on to the sandbox pages (And also a couple other things that ended up being removed by carelessness on my part, like the "Predating spacetime isn't 1-A" section in the FAQ and etc). When can I expect you to write that list you mentioned before?
If you're picking up my work for me, my list would just be things mentioned in previous posts of mine which were never conclusively resolved (we disagreed, you didn't care to comment, or we agreed something needed to be done but couldn't hash out the details).

But to answer your question I'm working tomorrow, and getting out of the house on Friday plus one day on the weekend. If I've sufficiently recovered, I could respond on Thursday, the weekend, or Monday.

Let's say, 25% Thursday, 40% Saturday/Sunday, 30% Monday, 4.9999% some day in the week after that, 0.0001% never.
 
I see no reason why it wouldn't be, when adding a timeline would be.
Timelines and dimensional levels aren't really equivalent at all, so that's a pretty faulty comparison.

If you're picking up my work for me, my list would just be things mentioned in previous posts of mine which were never conclusively resolved (we disagreed, you didn't care to comment, or we agreed something needed to be done but couldn't hash out the details).

But to answer your question I'm working tomorrow, and getting out of the house on Friday plus one day on the weekend. If I've sufficiently recovered, I could respond on Thursday, the weekend, or Monday.

Let's say, 25% Thursday, 40% Saturday/Sunday, 30% Monday, 4.9999% some day in the week after that, 0.0001% never.
Yeah I'll pick up the work. Would rather get this done with as soon as is reasonably possible.

You all can expect a last post from me later today.
 
Timelines and dimensional levels aren't really equivalent at all, so that's a pretty faulty comparison.
But the argument behind it (by adding something, it's becoming meaningfully bigger, and the only way to do that is to reach a higher cardinality) is the same.
 
We don't consider adding an extra timeline to an infinite multiverse to make it Low 1-C.

We should not consider adding an extra dimension to an infinite stack to make it High 1-B+.
I don't think a simple "Infinity + 1" is the reasonable difference, but a difference between countable infinity and uncountable infinity.
 
But the argument behind it (by adding something, it's becoming meaningfully bigger, and the only way to do that is to reach a higher cardinality) is the same.
Not really, since adding a timeline to an infinite multiverse doesn't increase its scope in any way whatsoever, whereas we are talking about a case in which a difference in size between X (Infinite-dimensional space) and Y (Higher space above it) is already granted. The actual conundrum is finding out what exactly this difference in size must be. You're misreading the order of the argumentation.

That said, I don't really mind conceding the issue for the moment. I really only begun discussing it because, to my mind, it was something we basically already accepted and just messed up the application of. But seeing as it's relatively controversial and also not directly related to the Tiering System revisions, I've no issue with dropping the issue here and leaving it for some later time.



Alright, so, to list what's left, and how I addressed it, if at all:

I think it's weird how the question on affecting multiple infinite multiverses only mentions that range can actually be treated as above-baseline for those feats if it's established that way canonically, while I believe our standards let us apply that to both AP and range, if the piece of fiction spells it out like that.

Dorammu might be a weird example, since it ends up saying "yet never actually displays any superiority over it, and is in fact vulnerable to time-based abilities due to his timeless nature" which is kind of a weird thing to say; why would being timeless make someone vulnerable to time-based abilities that they'd otherwise be immune to? Maybe that isn't actually how the character works, and it's instead meant to say something like "...vulnerable to time-base abilities despite his timeless nature".
The first thing, I don't particularly care about, since it was in the FAQ before these revisions and has nothing to do with them.

The second thing, on the other hand, I'm actually fine with removing, since a character who is specifically depicted as vulnerable to time-based abilities due to being timeless is just verse-specific nonsense that shouldn't be featured in a standards page at all. Furthermore, characters with Type 1 Beyond-Dimensional Existence are immune to spacetime manipulation as per the revised page, so this example really misleads more than instructs.

I think it's kinda weird that we break with the rest of the formatting of the Tiering System page by having the "1-A: Transcendent" section. This isn't a section for the tier 1-A, it's a section for the collection of Low 1-A, 1-A, and High 1-A. No other specific letter subset has a section like this, and I think it could be a smidge misleading; almost reading as an alternate name and description for that tier. I'd suggest deleting it.
I can't really un-see how ugly that is, anymore, so, removed it.

I noticed that in cutting some sections, we lost some information that may still be important. To give some specific tl;drs, "transcending a 1-A to the degree they transcend a normal human is just another step within 1-A, not a jump to High 1-A" and "predating the concepts of space and time isn't 1-A".
Added back both of those. Got removed due to carelessness on my part, as said.

I don't think Striking Strength for Tier 0s should be Irrelevant; our AP and SS ratings are equivalent for every other rating, and breaking that parity seems bad.
My response:

Striking Strength is a specialized form of AP that specifically notes how hard you punch. The power of a Tier 0 has nothing whatsoever to do with that (Since its "essence" isn't reducible to any external effects at all), so I think listing it as "Boundless" is misleading. Almost like we're saying there's such a thing as "Tier 0 punching strength." Same with Lifting Strength, really.

I think the changes to the other pages should be discussed now, instead of rushed out after the core changes are applied. You left the exact changes to Lifting Strength, Stamina, and Range kinda vague, and I'd think Large Size might need changes, and we may also want to consider changes on ability pages to give them 1-A/0 versions.
My suggestion for Lifting Strength is changing what's currently on the page to:

Lifting objects that are wholly superior to 3-dimensional space, and thus exceed basic infinite mass. This might range from characters who can somehow lift entire spacetime continuums, to characters who inhabit qualitatively superior levels of existence and thus surpass all dimensioned objects.

As for Large Size, my suggestion is changing the highest types to:

Type 10 (Higher-Order): Characters larger than a conventional multiverse, being either higher-dimensional spaces or structures roughly equivalent to such.

Type 11 (Inaccessible): Characters beyond physical size and composition entirely. That is: They are wholly irreducible to anything lesser than their own state of existence, and likewise, no "adding up" of lesser things whatsoever can attain to them.

Type 12 (Boundless): Characters who are unqualifiedly beyond size and magnitude, both physical size and the qualitative analogues found in 1-A to High 1-A This type is reserved for Tier 0

When it comes to power pages, there are only two that are directly relevant to these revisions. Here they are:



(About Tier 0) I'd say that immutability should also include disqualifying such entities which truly take actions, as that involves a progression between states. I know this was done to some extent under Creation, but I think more on it belongs here. Although I admit this could end up being misleading, and I don't know a great way to phrase it.
I agreed to this, but there's really no great way to phrase it without being misleading to a big degree, since there'll be a lot of qualifying verses that do use verbiage like "God did this and that and etc." So I'd leave that to be decided for individual cases instead of being plastered over the page in overly-broad strokes.

I think Type IV multiverses is a bad thing to bring up for High 1-A, due to its mathematical grounding which would disqualify it.
After mulling over it for a bit, I'm fine with this. Removed it. That said, I don't think it's impossible for a Type IV Multiverse to be High 1-A+ depending on how a verse describes it. For instance Manifold associates it with "all logically possible universes".* I don't think a verse happening to include broad logical laws as part of the conditions for the instantiation of a universe is that wild.

* I'm not interested on whether or not this is a consistent way to scale that verse in specific, btw. Just using it as a general illustration of the idea.
 
Last edited:
I agreed to this, but there's really no great way to phrase it without being misleading to a big degree, since there'll be a lot of qualifying verses that do use verbiage like "God did this and that and etc." So I'd leave that to be decided for individual cases instead of being plastered over the page in overly-broad strokes.
Just had an idea for this; maybe something along the lines of "Prospective Tier 0s that are described as taking actions in a way that's wholly incompatible with them being a prime mover"?
 
Just had an idea for this; maybe something along the lines of "Prospective Tier 0s that are described as taking actions in a way that's wholly incompatible with them being a prime mover"?
Could work. Here's my pitch:

Furthermore, although it is in a sense correct to describe such a character as doing many things, insofar as it can accomplish many effects, it cannot take action in the sense of "Doing one thing at one moment, and another thing at another moment." Put it simply: It can do a single "action" that terminates in many different effects, but not multiple successive actions, each of which cause many different effects. Due to the extremely technical nature of this requirement, however, it is to be evaluated independently from each individual case.
 
Last edited:
Some grammar nitpicks:
  • "Put it simply" > "Put simply" / "To put it simply"
  • "of which cause many" > "of which causes many"
  • "independently from each" > "independently for each"
Other than those, looks great!
 
Discussion about tier 0 SS we should get attention on, we'd want someone (could eventually be me) to look at your stuff for large size/NEP/immortality, and I think there may be one or two points we disagreed on earlier that still need to get hashed out.
 
I'm alright with most of your response there but the Striking Strength discussion is something I'll leave to you two. Also, I don't really mind 1-A being labelled Transcendent but I won't go to bat for it. It's really whatever to me. I do hold the opinion that we shouldn't nitpick specific language about a Tier 0s "actions" without looking at the surrounding context and info, though obviously major contradiction should be taken into account when it happens.
 
I don't think the "different hierarchy" business goes that hard in the new Tiering System anymore, since a "hierarchy" is really just "A set of inferior and superior levels all defined by the same basic attribute." In that sense you really only get a different hierarchy in any meaningful sense at the 1-A range now.

I'd also question whether "∞+1 dimensions" is even coherent for this case, since by doing this you haven't really added a more dimensions to the space, so there isn't many respects in which you can say it's larger. At best it's "larger" in the same way an uncountable number of infinite-D universes is larger than a single one, but this isn't exactly the difference we'd expect from one layer in a hierarchy to another, like I said here.
It is as coherent for this case as size at this level is in general, given that we can't simply deal with measures anymore. It is a space made up of uncountably infinite many of the former.

Your proposed formulation doesn't seem to establish, in any sufficiently clear way, that what you mean could not be covered by ∞+1 dimensions to a third party.

In principle, Agnaa's comparison to the situation with universes is fitting IMO. Regardless of whether we agree that an ∞+1 dimensional space is bigger or not, we can just as little expect fiction to follow that as we can expect fiction to mean that something larger than an infinite multiverse is automatically a multiverse of higher cardinality or dimension, instead of just more gatherings of countable multiverses. Likewise, we certainly can not rely on something larger and ∞ dimensional space means larger in terms of cardinality of dimensions, as opposed to just a countable superset of dimensions.

In principle the different hierarchy criteria need not disappear, given that, as discussed mentioned, composite hierarchies continue to exist in a less inclusive form. Aside from that it would of course require actually specific evidence.

My response:
If we argue they can punch at all then it makes sense to give them a rating match AP.
If they suffer from a complete inability to take this action, then "Inapplicable" would make more sense than "Irrelevant" IMO.
As for Large Size, my suggestion is changing the highest types to:
It seems to me that at the point we say that characters by nature are not size-like we have passed the point where it makes sense for them to have the Large Size ability. I think Type 11 & 12 shouldn't get it at all - their nature is instead classified by BDE.
When it comes to power pages, there are only two that are directly relevant to these revisions. Here they are:

What changes did you make to the page? I have a hard time spotting them.
I have my doubts that granting Absolute Immortality to entities with qualities makes sense, beyond the fact that no entity in a Tier 0's verse whatsoever can be killed before the time of death the Tier 0 assigned, buuuuut... don't feel like having a metaphysical debate about it. Think about it again and if you think it makes sense just keep it.

Btw. I would suppose the Invulnerability page also needs to be edited.
I agreed to this, but there's really no great way to phrase it without being misleading to a big degree, since there'll be a lot of qualifying verses that do use verbiage like "God did this and that and etc." So I'd leave that to be decided for individual cases instead of being plastered over the page in overly-broad strokes.
I would also think that this stipulation should actually be mentioned, not at last because for exactly such verses as mentioned a closer inspection on this point appears relevant.
 
What changes did you make to the page? I have a hard time spotting them.

Old is crossed out, new is bolded:
'''Nonexistent Physiology''' refers to the ability to lack certain aspects of one's existence, to paradoxically 'exist,' yet lack certain identifiable traits of existence or exist outside of a particular scope of 'existence.' While true nonexistence in the philosophical sense is impossible to prove or depict (As any character or entity, insofar as it appears in a fiction, is not actual nothingness), lesser other forms of the idea appear often in fiction.

#'''Superessential Nonexistence:''' Characters who completely transcend all individuality, all differentiation and all particularization, and therefore are above the distinction between any states of existence and nonexistence, on all possible levels. This type is reserved for Tier '''0''' characters and automatically granted to them they are automatically considered to have it. For a more in-depth explanation of the concept, see [[Omnipotence|here]].
 
Last edited:
It is as coherent for this case as size at this level is in general, given that we can't simply deal with measures anymore. It is a space made up of uncountably infinite many of the former.
As said, I've no issue with conceding the issue for the moment, yeah. Hardly to do with these revisions either way.

If we argue they can punch at all then it makes sense to give them a rating match AP.
If they suffer from a complete inability to take this action, then "Inapplicable" would make more sense than "Irrelevant" IMO.
They can create something that punches, or cause effects that functionally amount to force, but their, uh, """physiology""" makes it kinda nonsensical for them to punch anything in the usual sense. I generally tried to avoid "Inapplicable" because it could as well apply to things that can't punch due to a sort of defect on their part, rather than "Is above the conditions that allow punching to begin with."

It seems to me that at the point we say that characters by nature are not size-like we have passed the point where it makes sense for them to have the Large Size ability. I think Type 11 & 12 shouldn't get it at all - their nature is instead classified by BDE.
Fair point, I suppose. I don't mind coloquially referring to such differences as "size-like" strictly in the sense there's a sort of 'vastness' at play there, but outright classifying it as Large Size is probably misleading indeed.

What changes did you make to the page? I have a hard time spotting them.
They are nonexistent, of course. 🙏

... Jokes aside: I added a fourth type and a second paragraph at the bottom on how to format it.

I have my doubts that granting Absolute Immortality to entities with qualities makes sense, beyond the fact that no entity in a Tier 0's verse whatsoever can be killed before the time of death the Tier 0 assigned, buuuuut... don't feel like having a metaphysical debate about it. Think about it again and if you think it makes sense just keep it.

Btw. I would suppose the Invulnerability page also needs to be edited.
Eh, looking back, true. There's no difference between "Participated absolute immortality" and very potent Type 8 (9, if you're the thing's avatar or something), so, yeah.

Good point on Invulnerability.

I would also think that this stipulation should actually be mentioned, not at last because for exactly such verses as mentioned a closer inspection on this point appears relevant.
Yeah, already added it in.
 
Not really, since adding a timeline to an infinite multiverse doesn't increase its scope in any way whatsoever, whereas we are talking about a case in which a difference in size between X (Infinite-dimensional space) and Y (Higher space above it) is already granted. The actual conundrum is finding out what exactly this difference in size must be. You're misreading the order of the argumentation.

That said, I don't really mind conceding the issue for the moment. I really only begun discussing it because, to my mind, it was something we basically already accepted and just messed up the application of. But seeing as it's relatively controversial and also not directly related to the Tiering System revisions, I've no issue with dropping the issue here and leaving it for some later time.



Alright, so, to list what's left, and how I addressed it, if at all:


The first thing, I don't particularly care about, since it was in the FAQ before these revisions and has nothing to do with them.

The second thing, on the other hand, I'm actually fine with removing, since a character who is specifically depicted as vulnerable to time-based abilities due to being timeless is just verse-specific nonsense that shouldn't be featured in a standards page at all. Furthermore, characters with Type 1 Beyond-Dimensional Existence are immune to spacetime manipulation as per the revised page, so this example really misleads more than instructs.


I can't really un-see how ugly that is, anymore, so, removed it.


Added back both of those. Got removed due to carelessness on my part, as said.


My response:




My suggestion for Lifting Strength is changing what's currently on the page to:



As for Large Size, my suggestion is changing the highest types to:



When it comes to power pages, there are only two that are directly relevant to these revisions. Here they are:




I agreed to this, but there's really no great way to phrase it without being misleading to a big degree, since there'll be a lot of qualifying verses that do use verbiage like "God did this and that and etc." So I'd leave that to be decided for individual cases instead of being plastered over the page in overly-broad strokes.


After mulling over it for a bit, I'm fine with this. Removed it. That said, I don't think it's impossible for a Type IV Multiverse to be High 1-A+ depending on how a verse describes it. For instance Manifold associates it with "all logically possible universes".* I don't think a verse happening to include broad logical laws as part of the conditions for the instantiation of a universe is that wild.

* I'm not interested on whether or not this is a consistent way to scale that verse in specific, btw. Just using it as a general illustration of the idea.
Looks good to me.
 
They can create something that punches, or cause effects that functionally amount to force, but their, uh, """physiology""" makes it kinda nonsensical for them to punch anything in the usual sense. I generally tried to avoid "Inapplicable" because it could as well apply to things that can't punch due to a sort of defect on their part, rather than "Is above the conditions that allow punching to begin with."
If their physiology makes the notion of them punching nonsensial than it is, in practice, not really different from someone that just can't. Irrelevant just doesn't seem like a good description of a stat. Just because it's irrelevant to their overall fighting capability we should not list it as such IMO. Like, lesser incorporeal reality warpers essentially face the same issue.
Listing it as inapplicable doesn't make it out as more of a flaw than it is. It simply points out that this is an action they can't take, which appears accurate.
They are nonexistent, of course. 🙏

... Jokes aside: I added a fourth type and a second paragraph at the bottom on how to format it.
I feel like that fourth type doesn't make sense on this particular page, as what the type basically says is that they are not nonexistent at all. It's highly weird to basically say "this character is nonexistent in the sense that they are beyond nonexistence".

I'm also sceptical about the formulation in general. I thought the theory was that in terms of properties (as opposed to qualities) monads are not necessarily in conflict with the law of excluded middle? Read in a straightforward way this formulation appears contradictory to this. Perhaps you simplified a bit too much there?
 
If their physiology makes the notion of them punching nonsensial than it is, in practice, not really different from someone that just can't. Irrelevant just doesn't seem like a good description of a stat. Just because it's irrelevant to their overall fighting capability we should not list it as such IMO. Like, lesser incorporeal reality warpers essentially face the same issue.
Listing it as inapplicable doesn't make it out as more of a flaw than it is. It simply points out that this is an action they can't take, which appears accurate.
Yeah, put that way, I don't have an issue with it.

I feel like that fourth type doesn't make sense on this particular page, as what the type basically says is that they are not nonexistent at all. It's highly weird to basically say "this character is nonexistent in the sense that they are beyond nonexistence".

I'm also sceptical about the formulation in general. I thought the theory was that in terms of properties (as opposed to qualities) monads are not necessarily in conflict with the law of excluded middle? Read in a straightforward way this formulation appears contradictory to this. Perhaps you simplified a bit too much there?
Hm, I think this probably springs from us having different ideas of what NEP entails all-in-all.

Strictly speaking, the law of exluded middle is broken when you start messing up with contradictories, e.g. "This guy is neither red, nor not-red." But it's not really a problem when these oppositions are not contradictories but just contraries instead, like, say, a shirt that's neither black nor white.

I think it really only runs into a logical problem if you insist on saying that characters with NEP really are nonexistent, which I thought was something we generally rejected. Characters who personify voids of nothingness or something are strictly speaking just weird states of existence and not actual philosophical "nothing," as the page itself notes. I don't think there's a problem in saying Tier 0s are 'beyond existence and nonexistence' in the sense they transcend conventional existence (And extensions thereof) and also all such weird states.
 
Last edited:
Status
Not open for further replies.
Back
Top