• This forum is strictly intended to be used by members of the VS Battles wiki. Please only register if you have an autoconfirmed account there, as otherwise your registration will be rejected. If you have already registered once, do not do so again, and contact Antvasima if you encounter any problems.

    For instructions regarding the exact procedure to sign up to this forum, please click here.
  • We need Patreon donations for this forum to have all of its running costs financially secured.

    Community members who help us out will receive badges that give them several different benefits, including the removal of all advertisements in this forum, but donations from non-members are also extremely appreciated.

    Please click here for further information, or here to directly visit our Patreon donations page.
  • Please click here for information about a large petition to help children in need.

Expanding the References for Common Feats page

I mean, the way the feat you've calc'd and the way I calc'd the same feat revolve around different methods. In your feat, the guy looked like he's actively tearing the rips apart to get to the heart. With my calc, it's more like punching through the ribcage like Scorpion from Mortal Kombat (or was that Sub Zero?).
 

Typical fighting stats - knife throwing​

Low end athletic human knife throwing speed = 26 mph = 41.842944 kph = 11.62304 m/s (Peak Human)

High end athletic human knife throwing speed = 30 mph = 48.28032 kph = 13.4112 m/s (Superhuman)

Low end peak human knife throwing speed = 33.88958482 mph = 54.54 kph = 15.15 m/s (Superhuman)

Mid end peak human knife throwing speed = 35.79098067 mph = 57.6 kph = 16 m/s (Superhuman)

High end peak human knife throwing speed = 37.69237652 mph = 60.66 kph = 16.85 m/s (Superhuman)

What about axe throwing ?​

 
So yeah, here's the feat for ripping a human heart out: https://vsbattles.fandom.com/wiki/User_blog:Flashlight237/Common_Feat:_Ripping_a_Heart_Out

Y'all needed it.
Okay, so there are two different ways of handling the feat. I gave ArmorChompy the blessing needed to make his version of pulling the heart out (physically tearing the ribs apart) a Common Feat. Now I need to get my version (the rib punch method) evaluated.
 
Using values above:
  • Density: 7.874 g/cm^3
  • Boiling point: 2862 °C
  • Heat of fusion: 13,810 J/mol
  • Heat of vaporization: 340,000 J/mol
  • Molar Heat Capacity 25.10 J/(mol*K)
  • Molar Mass: 55.8450 g/mol
25.10*(2862-20 C)+13810+340000 = 425144 J/mol

55.845 amu / 7.874 g/cm^3 = 7.09 mol/cm^3

425144 * 7.09 = 3,014,270 J/cm^3

The calc mentioned by Flashlight237 was indeed invalid
I know that this is late but is this what you or what Flashlight237 calculated?
 
I found a few calculations Armorchompy, Phoenks, and Arceus0x made.
i feel like submitting calculations on behalf of someone else (without their permission) is really weird and you Maybe Shouldn't Do That, just feels off to me

StretchSebe said a similar thing when you came onto my wall with like 3 different mario calculations (one of which was theirs), they said they weren't ready to submit it for eval and they didn't particularly appreciate that you did on their behalf without asking
 
StretchSebe said a similar thing when you came onto my wall with like 3 different mario calculations (one of which was theirs), they said they weren't ready to submit it for eval and they didn't particularly appreciate that you did on their behalf without asking
Sorry about that. I did apologize to him, but I meant to tell him we can't use black holes to scale durability.
 
In 2020, I corrected our calculation on incinerating a building. It was a simple calculation, and effectively suggested that the standard building would be a two-story building the size of a house made primarily of concrete, and that incineration would melt it (given that the heat capacity of concrete is actually lower than that of fire in many instances).

Well, I goofed it up, and didn't consider for a major factor- that being that I used square footage of a house to determine the size of this building, when square footage is divided across the floors of a house. I didn't account for that, so since I used a two-story building, the calculation had about double the land area it should have, because half of its area was actually just the second story.

I've fixed that calculation now, here. It's a small adjustment but it shifts the feat from the lower bounds of Low 7-C to the upper bounds of 8-A.

This feat is already on the References for Common Feats page, so I'm letting you know, and asking for an evaluation of the edit, because while the math is functionally the same, that is important.
 
Well, I goofed it up, and didn't consider for a major factor- that being that I used square footage of a house to determine the size of this building, when square footage is divided across the floors of a house. I didn't account for that, so since I used a two-story building, the calculation had about double the land area it should have, because half of its area was actually just the second story.
Yeah, that's the weird thing that you gotta know about buildings. Usually the square footage is the amount of space you have inside a building, which includes all floors. The actual area of the space the building takes up is called "floor space": https://en.wikipedia.org/wiki/Floor_area
 
I strongly suggest we re-organize the Miscellaneous Feats section on the page; I think we should make a sub-section/section for all the shaking, punching, and throwing calculations we currently have.

I've also been thinking of making a couple of calculations, one going over the required energy needed to create or destroy a pocket dimension or realm with a planet and another for one with a solar system. Does anyone know the formula I should use for these two feats?
 
Using values above:
  • Density: 7.874 g/cm^3
  • Boiling point: 2862 °C
  • Heat of fusion: 13,810 J/mol
  • Heat of vaporization: 340,000 J/mol
  • Molar Heat Capacity 25.10 J/(mol*K)
  • Molar Mass: 55.8450 g/mol
25.10*(2862-20 C)+13810+340000 = 425144 J/mol

55.845 amu / 7.874 g/cm^3 = 7.09 mol/cm^3

425144 * 7.09 = 3,014,270 J/cm^3

The calc mentioned by Flashlight237 was indeed invalid
Dude! Wrong way!
 
You can ask other staff members to temporarily unlock the "References for common feats" page if necessary.
 
He refers to the fact that the 9-C+ that I am refuting was already refuted years ago and changed to 10-A (which is the same thing that I am proposing). He didn't say anything about the other ends or the other two calculations I did there (the calculations about crushing human necks and breaking spines, both accepted)..
I may be misunderstanding your meaning here but are you saying despite it being fixed people are still using the 9-C+ value instead of the 10-A corrected version?


Cause this isn't being worded corrcectly some way if you're affirming what KLOL just said from the looks of it?
 
I may be misunderstanding your meaning here but are you saying despite it being fixed people are still using the 9-C+ value instead of the 10-A corrected version?


Cause this isn't being worded corrcectly some way if you're affirming what KLOL just said from the looks of it?
Yeah. And KLOL did not comment that to imply that my calculation is wrong or something like that, he simply commented that to clarify that the 9-C+ calculation was outdated and the updated version was already available a long time ago.

In any case, what I am proposing here is that the rest of the ends and the other two calculations that appear on the blog be added to the common feats page.

Breaking a human neck​

  • Low-End: 151.668563597 Joules (10-A)
  • Mid-End: 1400 Joules (9-C)
  • High-End: 1710 Joules (9-C)

Breaking a human neck (Compression)​

499.68325216 Joules (9-C)

Breaking a spine​

500.588492134 Joules (9-C)
 
Yeah okay I get ya now, I didn't link KLOLs reply because I thought he rejected it, that's where that confusion came in.

Since we currently don't have a compression method you want to add that then, let me ping more cgms to see if we're cool with that then.

@KLOL506 @Flashlight237 @SeijiSetto @Damage3245

Tdlr for those pinged he wants to know if its cool to add the corrected compression method to the common fests page, he isn't replacing DTs frag method he's just adding this additinal method of breaking a neck via compression
 
We don't seem to be having much luck getting tier 3 feats added to the page. Perhaps we should start by get a few more evaluations for our pocket dimension with a galaxy calculation?
 
Back
Top