Upgrade Spy x Family

[Kisaragi_Megumi]

For Loid he was described as having a "physical ability" of 60 - 70 while Yor was a 100" , which would make him 17486343.3003 Joules Wall level+

^^^

 

[RandomGuy2345]

^^^

Short answer: No.

 

[ElajRuengies]

^^^

That isn't a calc. that's just scaling him to Yor's calc, which is wrong

 

[Kisaragi_Megumi]

Then what now?

@ElajRuengies

 

[ElajRuengies]

Also @Peppersalt43, all those Matchups you're making with Yor and Loid gotta go

 

[RandomGuy2345]

Also @Peppersalt43, all those Matchups you're making with Yor and Loid gotta go

Why didn't he just wait instead of making the matchups right off the bat lol.

 

[ElajRuengies]

@ElajRuengies

Well normally I'd say just scale them based on whatever calc was accepted, but as this whole thing has been a confusing mess I have no idea what values are accepted and what values aren't

Why didn't he just wait instead of making the matchups right off the bat lol.

No Idea.

 

[Kisaragi_Megumi]

Also @Peppersalt43, all those Matchups you're making with Yor and Loid gotta go

Why didn't he just wait instead of making the matchups right off the bat lol.

This is what happened because you guys was rushing applied the change that weren't even evaluated properly by staffs and the actual supporters

 

[RandomGuy2345]

This is what happened because you guys was rushing applied the change that weren't even evaluated properly by staffs and the actual supporters

I didn't rush shit lmfao.

 

[ElajRuengies]

This is what happened because you guys was rushing applied the change that weren't even evaluated properly by staffs and the actual supporters

The heck you mean "you guys"???

 

[Kisaragi_Megumi]

I didn't rush shit lmfao.

The heck you mean "you guys"???

No no no, i'm referring to that thread made by @Tie which where the rush in happened and here we are

 

[ElajRuengies]

Anywho, going by this-

Only the 101366.389 J value is correct here, as Wokistan has shown concrete would not be involved here.

Yor'd be 101.37 Kilojoules, Loid'd be 60.82 - 70.96 Kilojoules, and @KLOL506 would still be nose-deep in Calc Group Discussion Thread Limbo

 

[Kisaragi_Megumi]

I have asked @KobsterHope07 to come again but yeah, sadly we have no choice but go with @Tie original calc if thats the case

 

[Manhattanth06]

Only the 101366.389 J value is correct here, as Wokistan has shown concrete would not be involved here.

Why? From the picture, it can be seen that the hole is deep to the concrete floor. Of course, it will also destroy the concrete floor.

 

[Kisaragi_Megumi]

Why? From the picture, it can be seen that the hole is deep to the concrete floor. Of course, it will also destroy the concrete floor.

Mostly because from what Wokistan said below here:

Unfortunately, the calc is wrong. Indoor hardwood floors aren't constructed like that, there's not concrete right underneath them like that.

How to keep your hotel guestrooms quiet! Part 3: Recommended Assemblies

How to keep your hotel guestrooms quiet! Part 3 - Recommended Assemblies In the previous two modules, we discussed The importance of STC ratings to

www.hotelsuniversity.com

Welcome to Soundproofing Los Angeles - We keep quiet

No Noise is Good Noise: All-wood flooring systems reduce more than just sound

Wood is known for its natural ability to improve acoustic performance—to either dampen or expose sound to exacting requirements. In the music industry, wood forms the acoustical body of many instruments, such as pianos, violins, and guitars.

www.constructionspecifier.com

This one specifically for sports flooring's particularly relevant, showing quite a bit of clearance between the wood and the foundation.

http://www.hammerheadinc.com/wEcoSSCross.htm

You can keep the deformation of wood but there seems to be enough clearance between the concrete on that sports flooring website that none of it would really be touched. Other feats that are already present are likely more worthwhile, idk this manga but apparently someone launches a ball into space

 

[Manhattanth06]

However, I wanted Wokistan to comment again after he saw this picture.

 

[Manhattanth06]

I'm going to do the calculations on the broken concrete section, I'm not sure if it's correct or not.I will use the thickness of the wood 5 cm to scale.

Scan

Volume Use semi-ellipsoid
Formula : 2/3*pi*r(a)*r(b)*c

2/3*pi*115.4*115.4*22.3 = 621978.101cc

Results

621978.101*40 = 24879124.04 Joules
24879124.04 + 101366.389 = 24,980,490.429 Joules 9A


For Loid he was described as having a "physical ability" of 60 - 70 while Yor was a 100" , which would make him 17486343.3003 Joules Wall level+


Wood thickness width and depth of the pit Based on this calculation.

I should use the Spherical Cap Volume instead. will get more accurate results.

Volume : Use Spherical Cap Volume

Volume= 472290.059756 cc

Results

472290.059756*40 = 18891602.3902 Joules
18891602.3902+101366.389 = 18992968.7792 Joules Wall leve+

For Loid 70% of 18992968.7792 = 13295078.1454 Joules Wall level+

 

[KLOL506]

However, I wanted Wokistan to comment again after he saw this picture.

@Wokistan

 

[FantaRin_The_First]

I should use the Spherical Cap Volume instead. will get more accurate results.

Volume : Use Spherical Cap Volume

Volume= 472290.059756 cc

Results

472290.059756*40 = 18891602.3902 Joules
18891602.3902+101366.389 = 18992968.7792 Joules Wall leve+

For Loid 70% of 18992968.7792 = 13295078.1454 Joules Wall level+

Woah, nice. Here's hoping that this is true. While it isn't 9-A, anything is better than SxF getting downgraded to the lower-ends of 9-B! (cuz I am pretty sure that is where all of the other SxF calcs are.)

 

[ElajRuengies]

I should use the Spherical Cap Volume instead. will get more accurate results.

Volume : Use Spherical Cap Volume

Volume= 472290.059756 cc

Results

472290.059756*40 = 18891602.3902 Joules
18891602.3902+101366.389 = 18992968.7792 Joules Wall leve+

For Loid 70% of 18992968.7792 = 13295078.1454 Joules Wall level+

Woah, nice. Here's hoping that this is true. While it isn't 9-A, anything is better than SxF getting downgraded to the lower-ends of 9-B! (cuz I am pretty sure that is where all of the other SxF calcs are.)

You're still using Concrete Compressive strength, which again is wrong, as there's a gap between wooden flooring and the foundation- that's literally the reason why the first calc was wrong [EDIT: Nevermind I didn't scroll up one(1) whole message and read the thingy so ignore this] (Although I'd put in Loid's 60% value as well as his 70% value)

 

[Manhattanth06]

You're still using Concrete Compressive strength, which again is wrong, as there's a gap between wooden flooring and the foundation- that's literally the reason why the first calc was wrong

How should I fix it?

 

[RandomGuy2345]

How should I fix it?

[EDIT: Nevermind I didn't scroll up one(1) whole message and read the thingy so ignore this] (Although I'd put in Loid's 60% value as well as his 70% value)

 

[Manhattanth06]

Bump

 

[Manhattanth06]

I have created my calculation blog. The only thing left is to wait for wokistan evaluate my calc.

 

[Manhattanth06]

Can I find the depth of a hole like this? If I could, I would recalculate the whole thing.

 

[Manhattanth06]

Can I find the depth of a hole like this?

@KLOL506

 

[Dragonite007]

@KLOL506

You can't ping other users

 

[Manhattanth06]

You can't ping other users

Sorry

 

[Manhattanth06]

Bump

 

[KLOL506]

Can I find the depth of a hole like this? If I could, I would recalculate the whole thing.

Sure, why the hell not

 

[Manhattanth06]

Bump

 

[Peppersalt43]

Yeah that was Yor, and that wasn't allowed because Extreme KE isn't allowed for things that weigh less than Robert Wadlow or something(?) (Even though Volleyball Mass- 0.27 kg, plus escape Velocity- 11000 m/s, would've resulted in 16.335 Megajoules in the KE formula, or Wall level+, so it wouldn't have even been that ridiculous- pretty consistent with the floor destruction shown so it's not like it would've violated KE rules)

That standard is pretty stupid and arbitrary frankly.

We were discussing it on this thread, and Armorchompy and I made the revamped standards here. Unfortunately thread's been dead for a while now.

So uh, that got accepted

Can we use the ball feat now?

 

[ElajRuengies]

So uh, that got accepted

Can we use the ball feat now?

Sure, although I think there's a different calc that's got slightly higher results on the fence

 

[KLOL506]

So uh, that got accepted

Can we use the ball feat now?

Yeah, we can use it now.

 

[RandomGuy2345]

So Wall+ Spy x Family?

I think I got a verse that would be a good match for Yor...

 

[Peppersalt43]

So Wall+ Spy x Family?

I think I got a verse that would be a good match for Yor...

WWE again?

 

[RandomGuy2345]

WWE again?

No.

 

[Kisaragi_Megumi]

Finally, Hongo vs Yor is real

 

[Peppersalt43]

Sure, although I think there's a different calc that's got slightly higher results on the fence

Link to it?

 

[ElajRuengies]

Link to it?

I have created my calculation blog. The only thing left is to wait for wokistan evaluate my calc.

Ever so slightly higher than the Volleyball escape velocity KE, but higher nonetheless