Escanor vs Endeavor

[DaReaperMan]

https://media.**********.net/attachments/1054518028970246174/1173398188586176573/831c65f3d01b74e3cfd455b9f4750f55dd591f6cc52e42749869b2f012af7989_1.jpg?ex=6563cf38&is=65515a38&hm=8e9caf8544c8abffc1eb51a3e5d570067dd8391f8465f64a7d5f9afbc7a817ab&
Both High 6-C (Yes that means it stays dawn so Escanor doesn't just last a decently long time and AP-****)

Speed Equal

Battle takes place in Jurassic Park

Escanor: 0

Endeavor: 0

Inconclusive: 0

 

[Delta3000]

what's escanors ap?

 

[DaReaperMan]

what's escanors ap?

Somewhere above 200 Gigatons methinks

 

[Phoenks]

I think this is pretty one-sided for Escanor. His flames seem to be quite a bit hotter, being able to bypass those who have very good resistance to heat, and explicitly hotter than normal fire. His resistance also scales to that.

I don't really think Endeavor has that going for him.

He can also absorb the heat from Endeavor's flames and use it to power himself.

 

[DaReaperMan]

I think this is pretty one-sided for Escanor. His flames seem to be quite a bit hotter, being able to bypass those who have very good resistance to heat, and explicitly hotter than normal fire. His resistance also scales to that.

I don't really think Endeavor has that going for him.

He can also absorb the heat from Endeavor's flames and use it to power himself.

Oof, should I use an earlier key then? Like, second key?

 

[Phoenks]

Oof, should I use an earlier key then? Like, second key?

I literally know nothing about Deadly Sins, I'm just going off what I see on the profile.

But it seems he has the same powers in all keys so I don't think it'd change anything.

 

[Epiccheev]

Iirc Touya was able to melt tungsten chains without much problem, but idk if Endeavor scales.

I'm not sure about what heat scaling looks like in Nanatsu no Taizai, but from my head demon fire can burn a forest that's fireproof to normally occuring flames and Escanor's Sunshine is higher than that.
he can also passively melt metal armors just by being in their victinity.

 

[Makai641001]

Iirc Touya was able to melt tungsten chains without much problem, but idk if Endeavor scales.

Touya’s flames as a kid were considered as « stronger than Endeavor’s » and he burned his arm when he attacked Shoto.

Remember that all of this was before his Blue flames

I'm not sure about what heat scaling looks like in Nanatsu no Taizai, but from my head demon fire can burn a forest that's fireproof to normally occuring flames and Escanor's Sunshine is higher than that.
he can also passively melt metal armors just by being in their victinity.

Escanor is far over 30 k degrees C.

He casually melted an armor that can resist being exposed for long periods of time inside natural lightnings without any signs of damage, and he did so from meters while not at his peak.

Idk what the Heat scaling looks like in MHA but i remember from another thread that it caps around 5.5k degrees.

Escanor Is also a fvcking tank that took blasts from characters several times stronger than him

He can endure at least 2x his own AP (With Rhitta too) without taking much damage.

 

[Phoenks]

If his heat is really that much higher then this goes from one-sided to nearing on the edge of stomp.

 

[Makai641001]

If his heat is really that much higher then this goes from one-sided to nearing on the edge of stomp.

It really Is a stomp