- 20,558
- 15,221
Yoooo this is me 
Yee me ain't like programming, not for me
Yee me ain't like programming, not for me
-
This forum is strictly intended to be used by members of the VS Battles wiki. Please only register if you have an autoconfirmed account there, as otherwise your registration will be rejected. If you have already registered once, do not do so again, and contact Antvasima if you encounter any problems.
For instructions regarding the exact procedure to sign up to this forum, please click here. -
We need Patreon donations for this forum to have all of its running costs financially secured.
Community members who help us out will receive badges that give them several different benefits, including the removal of all advertisements in this forum, but donations from non-members are also extremely appreciated.
Please click here for further information, or here to directly visit our Patreon donations page. -
Please click here for information about a large petition to help children in need.
One Piece General Discussion: Elbaph
- Thread starter KingTempest
- Start date
-
- Tags
- one piece
- 324
- 313
- 324
- 313
Shouldn't Kaido keep his 40.1c speed value as he outsped Giant Luffy mid attack?
- 63
- 29
This was always gonna happen, if not now then later as the series is ending when we have even higher feats.
- 18,140
- 13,942
Why is Luffy a 4 foot tall Fortnite character
- 20,558
- 15,221
- 18,140
- 13,942
Because I'm the strongest. Or maybe I was the strongest because I'm SlendVeny... I can never remember.Because he’s Luffy… why are you SlendVeny?
- 177,398
- 90,308
It is very important to prioritise getting that task properly finished then. Revisions are not allowed to be left half-finished if they begin to be applied.
- 177,398
- 90,308
- 34,562
- 34,993
I'm pretty sure all of the God Tiers at least should be Class P now, so I'll implement that change now to the remaining profiles though we will have to do a proper clean-up thread at a later date when it's time to properly revise the profiles.It is very important to prioritise getting that task properly finished then. Revisions are not allowed to be left half-finished if they begin to be applied.
- 324
- 313
Why would the God Tiers only be Class P when Dressrosa Zoro is Class P from overpowering Fujitora's gravity? Fuji's gravity is rated at 1.67571545e17 kg and the ceiling for Class P is 10^18 kg. 10^18/1.6757154500037 × 10^17 = ~5.96. Is it really fair to say people like Kaido and Big Mom are equal to or a few times stronger than Dressrosa Zoro?
- 177,398
- 90,308
Thank you for helping out.
If there are no higher calculations for them, maybe they can get "At least Class P, likely higher"?
- 34,562
- 34,993
That's too big of a gap for upscaling currently.
- 324
- 313
Maybe for characters around Dressrosa Zoro's tier. They're literally called God Tiers, why shouldn't there be a big gap in their abilities? I don't see how Dressrosa Zoro and Base Kaido are going extreme diff in an arm wrestling contest.
- 34,562
- 34,993
Yeah, but we can't just make up stats for the characters because we think they're significantly stronger.
- 177,398
- 90,308
What about this solution?If there are no higher calculations for them, maybe they can get "At least Class P, likely higher"?
Stefano4444
He/Him- 6,812
- 6,060
At least Class P, likely higher/far higher for anyone who upscale from Dressrosa Zoro its the safest/fairest option.What about this solution?
- 324
- 313
I was thinking "At least Class P, likely Far Higher, Possibly Class E"
- 177,398
- 90,308
I saw a (partial) quote by Jiddu Krishnamurti that may help explain the difference between Luffy and Blackbeard, and why Blackbeard is afraid whereas Luffy isn't.
"One who is in love with life and who sees life in the eyes of people becomes free from the fear of death."
"One who is in love with life and who sees life in the eyes of people becomes free from the fear of death."
- 324
- 313
- 1,242
- 1,152
Onigashima, Flower Capital and the Bajrang Gun
Currently Onigashima is calculated to be 57 KM in diameter, with the another landmark of Wano Country; the Flower Capital, being calculated to be 404 KM across from it, and Luffy's attack the Bajrang Gun being calculated to be 89 KM in diameter based on comparison to Onigashima as well. These...
Last edited:
- 324
- 313
The last thing I remember was just that the 57 km was removed and not replaced by any other calc.Have you checked if this thread would interfere? Because right now, Onigashima is accepted as 6KM in diameter unless something has changed (and I don't think Namikami being banned affects the result)Onigashima, Flower Capital and the Bajrang Gun
Currently Onigashima is calculated to be 57 KM in diameter, with the another landmark of Wano Country; the Flower Capital, being calculated to be 404 KM across from it, and Luffy's attack the Bajrang Gun being calculated to be 89 KM in diameter based on comparison to Onigashima as well. These...vsbattles.com
- 1,242
- 1,152
I'll be honest, it's vague enough that I can't say for sure, but I was under the impression that while there wasn't a replacement calc, anything over 6km would likely not work because the idea of the thread was that anything over 6km is too large.
Obviously, there would probably be leeway (I doubt 6.5 or 7 km would be too large), but 31km might be an issue.
I suppose I could be wrong though.
- 324
- 313
Wow, that sucks. It's been like 8 months since they've been removed with no replacement. As far as I've seen there's been no recalcs with the new suggested sizes.
- 52,649
- 46,899
Hey hey, you just said the wrong thing, Ethereal! That implies you expected people downgrading OP to do ANYTHING themselves.
- 1,242
- 1,152
Yeah, it is what it is.
One Piece - Wano Country Arc Calc Removals
As a result of this thread being accepted, these three size calculations for Onigashima, the Flower Capital and the Bajrang Gun are being removed. Consequently any AP and Lifting Strength calcs that depends on those size values will be removed: Zoro Cuts Onigashima Horn: Low 6-B (1.92...
I'm gonna be honest, I have a blank spot in my memories regarding One Piece revisions from August to December 2025 (other then the locking/outdated staff thread and earthquake stuff) so I don't know if there was something else that happened, but it's possible that this is currently accepted? Maybe not though.
Tbh I just don't know, sorry. All I'm saying is that trying to put out an Onigashima calc over 5x larger then the 'accepted' maximum of 6 km might not work at all.
- 20,558
- 15,221
Yee, you would first kinda need to counter the arguments of that thread (which are bs arguments to begin with not going lie)
I was going to do it myself but I just didn’t have the time to create another thread and deal with bs, and then there were also other people implying to do the same… but then after another bs also came up and that was removing the earthquakes while not doing anything to resolve the issue yet again
Just creating more problems for the verse… with somehow staff blindly agreeing to them (tho I don’t fully blame them as they aren’t too well versed on one piece).
- 324
- 313
Even in the link, the specific size isn't even accepted. Just "they look fine" without giving an exact accepted size to recalc the old Onigashima calcs.Yeah, it is what it is.
For reference, this thread removed a lot of those feats.One Piece - Wano Country Arc Calc Removals
As a result of this thread being accepted, these three size calculations for Onigashima, the Flower Capital and the Bajrang Gun are being removed. Consequently any AP and Lifting Strength calcs that depends on those size values will be removed: Zoro Cuts Onigashima Horn: Low 6-B (1.92...
I'm gonna be honest, I have a blank spot in my memories regarding One Piece revisions from August to December 2025 (other then the locking/outdated staff thread and earthquake stuff) so I don't know if there was something else that happened, but it's possible that this is currently accepted? Maybe not though.
Tbh I just don't know, sorry. All I'm saying is that trying to put out an Onigashima calc over 5x larger then the 'accepted' maximum of 6 km might not work at all.
- 1,242
- 1,152
- 324
- 313
At least the earthquake calcs are making progress thanks to my CRT. The Mag 7 end of the worldwide earthquake should be able to go through. I hope...
- 20,558
- 15,221
… hope is all you can do… until someone with evil intentions comes along and turns the greenery into a toxic wasteland 
- 20,558
- 15,221
The numbers are stated to be oars sized… Hatcha being 36 meters doesn’t mean all of the rest will be the same size, the one who went through that gate seemingly seems to be way bigger than the rest and closer in size to oars
For example this guy is way shorter than the rest and is still 37 meters
Also using Jack who is closer to the screen on that panel and is 8 meters, the door would be around 43 meters in height, making the 68 meters more consistent
Last edited:
- 324
- 313
The problem is that if the size got retconned, then the statement would no longer be valid and even if Hatcha was the smallest, using a lowball value would be subject to less scrutiny than a highball value.
- 20,558
- 15,221
The lowball value (based on an assumption) is simply incorrect objectively…
Last edited:
- 20,558
- 15,221
Actually you can use Jack more accurately.. use Jack and scale him to the right door’s black lines that are more closer to him and then use that for the inner door on the left…
I believe that would reach 50 meters or more
I believe that would reach 50 meters or more
Last edited:
- 324
- 313
Even if all that is consistent it's going to be subject to the same counter arguments that removed the original calc in the first place. Any meta for a bigger Onigashima is just going to be immediately rejected unfortunately.
- 20,558
- 15,221
Well the issue is the max 6 km ASSUMPTION.... 1 assumption does not counter or override many stated sizes accurately scaling onigashima way above that dumb value.
- 20,558
- 15,221
Jack height = 55 px (8.30 m)
Right door black line = 31 px (4.6781818181818 m)
Left door black line = 18 px (4.6781818181818 m)
Door height = 283.5 px (73.681363636363 m)
There you go, no need for the numbers height assumptions
Last edited:
- 34,562
- 34,993
I don't see it as creating problems for the verse, I see it as removing problems.
- 24,306
- 37,730
- Thread starter
- #43,360
It's both tbh
It's like saying you amputate someone's arm cause their arm had cancer cells but now you left them with no arm
It's like saying you amputate someone's arm cause their arm had cancer cells but now you left them with no arm
