- 1,249
- 1,165
Staff votes
Minor revisions: 1 vote
Normal revisions: 2 votes
Controversal revisions or verses: 3 votes
Modifiers
Tier 2+: 1 Admin required
Tier 1+: At least 3 staff knowledgeable in Tier 1+
Time required
Self-evident changes: 24 Hours
Anything else: 48 Hours
Minor revisions: 1 vote
Normal revisions: 2 votes
Controversal revisions or verses: 3 votes
Modifiers
Tier 2+: 1 Admin required
Tier 1+: At least 3 staff knowledgeable in Tier 1+
Time required
Self-evident changes: 24 Hours
Anything else: 48 Hours
Disclaimer: This revision will NOT affect any calcs, any multipliers, any ratings, any values or anything else on any Bleach profile. This is solely a revision to put the contents below onto the Bleach verse page and will not affect any profiles or scaling whatsoever
This is like 4 months late, but now that every big thing has been taken care of, I'm going to release this. I genuinely do not know if a CRT is actually needed for this, but I'm making one anyways just to be safe. With that in mind, I am counting this as a minor revision that is self-evident because nothing is being altered. This is basically just a summary of Bleach profile AP/Durability ratings being placed onto the verse page.
With that in mind, here's a few points to bring up before you see the chart
- There are certain characters and certain keys not included. Right now, if a profile/key has no [statistics value] or [note] or equivalent that states the AP/Durability value, you can assume that they are not included. The reason is because I don't know the previous values and the newer values are dependant on characters that have yet to be revised. Most of these are CFYOW keys/characters, with some being TYBW cour 4 dependant. The only exceptions to this is Yushiro and I guess Mimihagi, who haven't been updated yet (I plan on potentially changing these two in a later CRT)
- The reason all the numbers may seem a bit strange is because I used the base number to do calculations. As an example, the 6-B calc used is 38.9447896688145 Teratons. In order to find a number with a multipler, I multiply that exact number (as in, I don't round first). Thus, if I was to multiply by 8x, I would do 38.9447896688145 x 8. If I was to do 5x after that, it would be 38.9447896688145 x 8 x 5. I would then round after that to 4 decimal places.
- Some of the numbers may have a 0 after them while others don't. Any value with 4 decimal places with the last digit being 0 means I have rounded it to 3 decimials, while any number with 3 or less decimal places means I did not need to round it to 4 decimal places, with an easy example being the 16.88 ExaFoe and anything derived from that.
- I separated the blog into different tiers. I'm open to revisions on how they should be sorted, but my original sorting that I wanted to do (11-9, 8-6, 5-3, 2-0) ended up making some sections too large, so I decided to alter it in a way that's weighted towards tiers with more values. With that in mind, the tier sections are not static. If there is a massive change in the future that would drastically increase the amount of values within a tier, you are free to alter the verse page to reflect these changes, so no single section is too long
- Striking Strength is technically also covered in this chart, it's just that as far as I'm aware, there is no value exclusive to Striking Strength, so it is redundent to mention.
- The reason I have chosen to include possibly, likely, various attacks/forms of the characters and the characters themselves in every rating is because Bleach scaling can be extremely difficult to understand. I can understand if people don't want it in the final version, but I do think it would be better with these additions, even if it doesn't look good because it lowers the chances that a revision would result in no one scaling to X value without anyone noticing. This way, anyone who revises these values with a CRT can quickly search for the characters in the verse page and relocate them. If the value then has no one scaling from it, they can just delete it.
- Tier 10-8. For 10-C and 10-B, it is obvious I cannot actually give a value other then the minimum assumption, as those values do not come from calcs. However, I am still unsure of what Kon's Steel fence breaking value is, as this is a relic of the past (I think almost a decade ago) and while Runugunga's 8-C was accepted when his profile was made, I don't know the exact value, as it seems to be based of his size alone, but since I don't know his actual size (other then at least 13M) and I don't know how they got 8-C specifically and where in 8-C, both 9-B and 8-C have simply been marked "At least X" with X being the minimum for that tier. If anyone knows what those values are, I could update this.
- If there is anything else you want to change, you can ask and I may accommodate (or not, if I don't like the idea)
Agree: @Random-Helper323, @LephyrTheRevanchist
Disagree? (not sure how you can disagree on this, but sure):
Last edited:
