Saitama and Garou speed upscale to mftl+

[Hellformer]

In this calc of garou and platinum sperm, there is an error which needs to be fixed. The calculations uses 1.3 milli second

https://cdn.**********.com/attachme...37ad8f10aaead86c794ef8d717de118ae1918f3678f4&

But it should have used 1.3 microsecond

https://cdn.**********.com/attachme...35c6af34fb3385bff61dca186528e2a39526989dd886&

So the speed calc should result in 4330c which is mftl+
Agree :
Disagree :
Neutral :

 

[Minos_the_Judge]

In this calc of garou and platinum sperm, there is an error which needs to be fixed. The calculations uses 1.3 milli second

https://cdn.**********.com/attachme...37ad8f10aaead86c794ef8d717de118ae1918f3678f4&

But it should have used 1.3 microsecond

https://cdn.**********.com/attachme...35c6af34fb3385bff61dca186528e2a39526989dd886&

So the speed calc should result in 4330c which is mftl+
Agree :
Disagree :
Neutral :

No. Its milliseconds. Its japanish stopwatch.

 

[The_Yellow_Topaz]

No. Its milliseconds. Its japanish stopwatch.

Uhhm, this is ''19 which is 19ms, but the timer goes down to '''13, which is below the denominated measurement in this picture. Could you provide a better example?

 

[Minos_the_Judge]

Uhhm, this is ''19 which is 19ms, but the timer goes down to '''13, which is below the denominated measurement in this picture. Could you provide a better example?

Its not 19 ms. Its 190 ms. 1 Second = 1000 ms. Not 100.

 

[The_Yellow_Topaz]

Its not 19 ms. Its 190 ms. 1 Second = 1000 ms. Not 100.

I see. If '' is 1/100 of a second, each unit would be 10 miliseconds. Given ''' should be 1/100 of the previous unit, or 0.1 miliseconds per unit. 13 units would be 1.3 miliseconds.

Thank you for the wonderful explanation. OP has been utterly debunked.

 

[Hellformer]

No. Its milliseconds. Its japanish stopwatch.

This stop watch doesn't have extra column for micro second this is why it shows only 2 dash marks instead of 3. The example which I have provided as an evidence clearly shows 2 dash marks for milliseconds and 3 dash marks for micro seconds.

 

[Hellformer]

I see. If '' is 1/100 of a second, each unit would be 10 miliseconds. Given ''' should be 1/100 of the previous unit, or 0.1 miliseconds per unit. 13 units would be 1.3 miliseconds.

Thank you for the wonderful explanation. OP has been utterly debunked.

 

[Therefir]

Didn't you saw this correction at the end of the chapter?

Well, that and the thousands of posts related to this feat, you probably have an idea why it's not as simple as comparing the standard time format to the timer shown in the manga.

 

[The_Yellow_Topaz]

This stop watch doesn't have extra column for micro second this is why it shows only 2 dash marks instead of 3. The example which I have provided as an evidence clearly shows 2 dash marks for milliseconds and 3 dash marks for micro seconds.

You're actually just illiterate in this case.

''00 isn't ms it's 1/100th of a second. That's a centisecond.
A milisecond is 1/1000th of a second. This
Meaning each extra dash mark represents a hundredth of the previous unit. '''00 is 1/100th of ''00, or 1/10000th of a second.
13/10000th of a second is the same as 1.3/1000th of a second, which is 1.3 miliseconds.

A microsecond is 1/1000000th of a second, pal.

 

[Dark_Soul20189]

Hard disagree FRA

 

[Damage3245]

You're actually just illiterate in this case.

There are more polite ways of getting your point across.

 

[Hellformer]

You're actually just illiterate in this case.

''00 isn't ms it's 1/100th of a second. That's a centisecond.
A milisecond is 1/1000th of a second. This
Meaning each extra dash mark represents a hundredth of the previous unit. '''00 is 1/100th of ''00, or 1/10000th of a second.
13/10000th of a second is the same as 1.3/1000th of a second, which is 1.3 miliseconds.

A microsecond is 1/1000000th of a second, pal.

Ohh ohk, no need to insult anyone by calling "illiterate" without knowing someone. You yourself being a literate can't have basic manners? What a shame.

 

[Hellformer]

Didn't you saw this correction at the end of the chapter?

Well, that and the thousands of posts related to this feat, you probably have an idea why it's not as simple as comparing the standard time format to the timer shown in the manga.

Thank you, it makes sense now

 

[Hellformer]

There are more polite ways of getting your point across.

Didn't know such uneducated goons exist over here.

 

[Hellformer]

Just want an answer for why saitama and garou aren't mftl+ when the mid end calc of this is 275125.731c / MFTL+

 

[Golden_Void]

Just want an answer for why saitama and garou aren't mftl+ when the mid end calc of this is 275125.731c / MFTL+

If there's MFTL+ values not being used, that means those values aren't accepted.

 

[Hellformer]

If there's MFTL+ values not being used, that means those values aren't accepted.

It would make sense if the values are high end. But I didn't find any reason for a mid end value being rejected.

 

[FriendOfTheTeaParty]

It would make sense if the values are high end. But I didn't find any reason for a mid end value being rejected.

Because the low end was found the best one to use.

 

[Hellformer]

Because the low end was found the best one to use.

But why

 

[FriendOfTheTeaParty]

But why

ask the calc members

 

[Hellformer]

ask the calc members

Okay